 |
WINCHES (PDF)
MX series
The MX winches are available in various configurations.
The system is equipped with slip ring and connections through
which surface instrumentation can communicate with the probe.
A precision measuring wheel and rotary encoder are also included
to allow the amount of cable played out to be tracked. The cable
is automatically wrapped on the drum in even layers through the
level wind mechanism. The motor is controlled by a 110V (or 220V
depending on the model) four-quadrant motor speed controller that
allows the speed to remains constant with a varying load and prevents
overhauling with heavy loads.
Dynamic electronic brake is a standard item with a mechanical
(disc) brake optional.
Motor
Controller
Speed
Load
Cable capacity
Cable Off-axis tolerance
Depth Encoder |
1/4 hp, SCR type
4 quadrant, with current limit
0 to 85 ft/min (26m/min)
100lbs (46 kgs)
4MXC 3281 ft (1000m) 1/8” (3.17mm) dia. Cable
4MXB-1000/1000ft (305m) 3/16” (4.76mm) dia.cable (video)
4MXA-1000/1640ft (500m) 1/8” (3.17mm) dia.cable
10°left, 10° right, 12° down, 45° up
BEI Model H20 (200pulses/turn) standard, others available |
WNA series
Versatile WNA series of winches are designed for installation
in logging vehicles or skid units. WNA winches offer standard
depth capability of 1800meters (5905 feet) and are equipped with
a two-speed transmission, manual and electronic braking system,
optional tension sensor with automatic cutoff, and LED depth/speed/tension
display.
|
